A50E-2
The A50E-2 is an addressable relay module that provides a single-pole, volt-free, change-over contact output. It is engineered for direct installation inside the enclosure of the equipment it controls. By placing the interface adjacent to the target device, it eliminates the need for long auxiliary wiring runs from the main control panel, significantly lowering installation […]
A45E-2
The A45E-2 is an addressable input interface unit specifically engineered for installation inside the enclosures of fire detection ancillary equipment. Connecting directly to the ZP loop wiring, this unit holds its own unique system address, allowing it to relay signals from external equipment straight into the fire alarm system. Once received, these input signals are […]
SIGA-CC1
The SIGA-CC1 / SIGA-MCC1 (Single Input) and SIGA-CC2 / SIGA-MCC2 (Dual Input) signal modules are intelligent, analog addressable components of EST’s Signature Series system. Upon receiving a command from the loop controller, these devices connect supervised Class B notification or telephone circuits to their corresponding power supplies. Depending on the application, the power inputs can […]
SIGA-CT1
The SIGA-CT1 (Single Input) and SIGA-CT2 / SIGA-MCT2 (Dual Input) modules are intelligent, analog addressable devices designed to interface one or two Class B, normally-open dry contact Initiating Device Circuits (IDCs). They are typically used to integrate alarm, supervisory, or monitor-type equipment into the fire system. Programmable Functionality & Operation The specific operating mode of […]
SIGA-CR
The Control Relay Module and the Polarity Reversal Relay Module are intelligent, analog addressable components of the Signature Series system. To accommodate different installation needs, both modules are available as either plug-in components (UIO versions) or standard 1-gang wall-mount units. SIGA-CR/MCR: Control Relay Module The SIGA-CR/MCR features a Form “C” dry relay contact designed to […]
PW-330MMC
The PW-330MMC is an intelligent, four-wire Input/Output Module featuring dual independent channels: one dedicated input and one supervised output. Two distinct LEDs provide real-time status indication for each channel. The input channel monitors dry (passive) switch contact inputs and reports their status to the fire alarm control panel. Under normal conditions, the input LED flashes; […]
PW-330MM
The PW-330MM is an addressable, intelligent monitor module that interfaces with a host control panel to supervise dry-contact initiating circuits. The module tracks the state of external passive switches, relaying real-time circuit status back to the FACP. The onboard LED status indicator provides visual diagnostics by flashing under normal standby conditions, latching steady-on during an […]
PW-330MMCR
The PW-330MMCR is an intelligent, two-wire Input/Output Module featuring dual independent channels: one dedicated input and one dedicated output. Two distinct LEDs provide real-time status indication for each channel. The input channel monitors dry (passive) switch contact inputs and reports their status to the fire alarm control panel. Under normal conditions, the input LED flashes; […]
FMM-101
The Notifier FMM-101A is a compact, addressable monitor module designed to integrate seamlessly with Notifier fire alarm control panels. Engineered for reliability, this module provides supervision for a single contact device, such as a manual pull station, waterflow switch, or other normally open dry-contact devices.
